original, as downloaded from http://www.qmail.org/netqmail-1.06.tar.gz

1 files changed, 82 insertions, 0 deletions

diff --git a/TEST.deliver b/TEST.deliver
new file mode 100644
index 0000000..4fc4c32
--- /dev/null
+++ b/TEST.deliver
@@ -0,0 +1,82 @@
+You can do several tests of qmail delivery without setting up qmail to
+accept messages through SMTP or through /usr/lib/sendmail:
+
+1. After you start qmail, look for a
+           qmail: status: local 0/10 remote 0/20
+   line in syslog. qmail-send always prints either ``cannot start'' or
+   ``status''. (The big number is a splogger timestamp.)
+
+2. Do a ps and look for the qmail daemons. There should be four of
+   them, all idle: qmail-send, running as qmails; qmail-lspawn, running
+   as root; qmail-rspawn, running as qmailr; and qmail-clean, running
+   as qmailq. You will also see splogger, running as qmaill.
+
+3. Local-local test: Send yourself an empty message. (Replace ``me''
+   with your username. Make sure to include the ``to:'' colon.)
+      % echo to: me | /var/qmail/bin/qmail-inject
+   The message will show up immediately in your mailbox, and syslog
+   will show something like this:
+           qmail: new msg 53 
+           qmail: info msg 53: bytes 246 from <me@domain> qp 20345 uid 666
+           qmail: starting delivery 1: msg 53 to local me@domain 
+           qmail: status: local 1/10 remote 0/20
+           qmail: delivery 1: success: did_1+0+0/
+           qmail: status: local 0/10 remote 0/20
+           qmail: end msg 53 
+   (53 is an inode number; 20345 is a process ID; your numbers will
+   probably be different.)
+
+4. Local-error test: Send a message to a nonexistent local address.
+      % echo to: nonexistent | /var/qmail/bin/qmail-inject
+           qmail: new msg 53 
+           qmail: info msg 53: bytes 246 from <me@domain> qp 20351 uid 666
+           qmail: starting delivery 2: msg 53 to local nonexistent@domain
+           qmail: status: local 1/10 remote 0/20
+           qmail: delivery 2: failure: No_such_address.__#5.1.1_/
+           qmail: status: local 0/10 remote 0/20
+           qmail: bounce msg 53 qp 20357
+           qmail: end msg 53 
+           qmail: new msg 54 
+           qmail: info msg 54: bytes 743 from <> qp 20357 uid 666
+           qmail: starting delivery 3: msg 54 to local me@domain
+           qmail: status: local 1/10 remote 0/20
+           qmail: delivery 3: success: did_1+0+0/
+           qmail: status: local 0/10 remote 0/20
+           qmail: end msg 54 
+   You will now have a bounce message in your mailbox.
+
+5. Local-remote test: Send an empty message to your account on another
+   machine.
+      % echo to: me@wherever | /var/qmail/bin/qmail-inject
+           qmail: new msg 53 
+           qmail: info msg 53: bytes 246 from <me@domain> qp 20372 uid 666
+           qmail: starting delivery 4: msg 53 to remote me@wherever
+           qmail: status: local 0/10 remote 1/20
+           qmail: delivery 4: success: 1.2.3.4_accepted_message./...
+           qmail: status: local 0/10 remote 0/20
+           qmail: end msg 53 
+   There will be a pause between ``starting delivery'' and ``success'';
+   SMTP is slow. Check that the message is in your mailbox on the other
+   machine.
+
+6. Local-postmaster test: Send mail to postmaster, any capitalization.
+      % echo to: POSTmaster | /var/qmail/bin/qmail-inject
+   Look for the message in the alias mailbox, normally ~alias/Mailbox.
+
+7. Double-bounce test: Send a message with a completely bad envelope.
+      % /var/qmail/bin/qmail-inject -f nonexistent
+      To: unknownuser
+      Subject: testing
+
+      This is a test. This is only a test.
+      %
+   (Use end-of-file, not dot, to end the message.) Look for the double
+   bounce in the alias mailbox.
+
+8. Group membership test:
+      % cat > ~me/.qmail-groups
+      |groups >> MYGROUPS; exit 0
+      % /var/qmail/bin/qmail-inject me-groups < /dev/null
+      % cat ~me/MYGROUPS
+   MYGROUPS will show your normal gid and nothing else. (Under Solaris,
+   make sure to use /usr/ucb/groups; /usr/bin/groups is broken.)